BBSSF - PROPYLENE FUEL CYLINDER, #PF-1000

  • MSDS: BBSSF
  • Manufacturer: TURNER INDUSTRIES INC
  • Product Name: PROPYLENE FUEL CYLINDER, #PF-1000
  • National Stock Number: 6850-00F005543
Product Identification

Product ID:PROPYLENE FUEL CYLINDER, #PF-1000
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005543
MSDS Number: BBSSF

Responsible Party
TURNER INDUSTRIES, INC./SYCAMORE, IL 60178

Emergency Phone: (815) 895-4545

Cage: EO078

Contractor
TURNER INDUSTRIES,INC.
SYCAMORE, IL 60178-2419 US

Telephone: 815-895-4545

Cage: EO078

Ingredients

PROPYLENE (PROPENE) (SARA III)

CAS: 115-07-1

RTECS: UC6740000

Fraction By Weight: 97%

ACGIH TLV: ASPHIXIANT; 9192


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 3%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192


METHANE

CAS: 74-82-8

RTECS: PA1490000

ACGIH TLV: ASPHYXIANT; 9192


ETHANE

CAS: 74-84-0

RTECS: KH3800000

ACGIH TLV: ASPHYXIANT 9192

Hazards

Effects of Overexposure:VERY HIGH LEVEL EXPOSURE MAY CAUSE ASPHYXIATION
BY OXYGEN EXCLUSION.

First Aid

First Aid:INHALATION: FRESH AIR. KEEP PATIENT WARM. ADMINISTER OXYGEN
IF PATIENT IS INTOXICATED.

Fire Fighting

Flash Point:-162F (CC)
Lower Limits:2.0%
Upper Limits:11.1
Extinguishing Media:CO2, FOAM, CLASS B OR C EXTINGUISHERS
Unusual Fire/Explosion Hazard:TYPICAL LPG

Accidental Release

Spill Release Procedures:LIQUID SPILLS WILL RESULT IN AN ACCUMULATION
OF GAS RATHER THAN LIQUID. PRECAUTION SULD BE TAKEN TO AVOID
SOURCES OF IGNITION.

Handling

Handling and Storage Precautions:STORE BELOW 125F.

Exposure Controls

Respiratory Protection:U.S. BUREAU OF MINES APPROVED AIR OR SUPPLY MASK
IN EVENT OF SPILL
Ventilation:LOCAL EXHAUST: RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:LIQUID CAN FREEZE SKIN USE GLOVES WHEN
HANDLING LIQUID.
Supplemental Safety and Health
MSDS DATE: 2/14/84.

Chemical Properties

Boiling Pt:B.P. Text:-54F
Vapor Pres:783
Vapor Density:1.48
Spec Gravity:0.512
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS REFINERY GAS ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:TEMP >125F, OPEN FLAMES, SPARKS & SOURCES
OF IGNITION.
Hazardous Decomposition Products:COMPLETE COMBUSTION - NONE, INCOMPLETE
- CO, CO2, H2O
Conditions to Avoid Polymerization:HIGH TEMP & PRESSURE IN PRESENCE OF
CATALYST.

Disposal

Waste Disposal Methods:ALLOW SPILLS TO EVAPORATE WITH ADEQUATE
VENTILATION. BURN UNDER CONTROLLED CONDITIONS USING PRESSURE
REGULATOR OR CONTROL VALVE AND APPROPRIATE BURNER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.